Description
20 Series EQs. You used to have to settle for second best in a reasonably priced EQ but not any more. With the new 20 Series from dbx® Professional Products you get a great EQ circuit, a graceful yet powerful limiter and the revolutionary new design of the Type III Noise Reduction.
Product Features
- Revolutionary instant encode/decode Type III® Noise Reduction in-circuit at the push of a button. Increases S/N ratio by up to 20dB
- Patent-pending PeakPlus® Limiter threshold range from 0dBu to +24dBu (off) can transparently tame the wildest hits or the subtlest nuances of any signal
- An extremely high quality EQ, patent-pending Type III Noise Reduciton, and the elegant new PeakPlus Limiter all in one great sounding box
- Four segment LED bargraph for BOTH Gain Reduction AND Output Level offers the most comprehensive visual feedback available
- Status LEDs offer visual feedback for all settings on the front panel
- Type: Electronically balanced/unbalanced, RF filtered
- Impedance: Balanced 40k ohm, unbalanced 20k ohm
- Max Input Level: >+21dBu balanced or unbalanced
- CMRR: >40dB, typically >55dB at 1kHz
- Connectors: 1/4″ TRS, male XLR (pin 2 hot), and barrier terminal strip
- Type: Impedance-balanaced/unbalanced, RF filtered
- Impedance: Balanced 200 ohm, unbalanced 100 ohm
- Max Output Level: >+21dBu balanced/unbalanced into 2k or greater, >+18dBm balanced/unbalanced (into 600)
- Bandwidth: 20Hz to 20kHz, +/-0.5dB
- Frequency Response: <10Hz to >50kHz, +0.5/-3dB
- Dynamic Range: 109dB 115dB
- Noise Reduction In: (+/-6 and +/-15dB range)
- Signal-to-Noise: >102dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth
- Dynamic Range: >120dB, unweighted
- Noise Reduction Out: (+/-6dB range)
- Signal-to-Noise: >94dB, unweighted, ref: +4dBu, 22kHz measurment bandwidth
- Dynamic Range: >120dB, unweighted
- Noise Reduction Out: (+/-15dB range)
- Signal-to-Noise: >90dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth
- Dynamic Range: >108dB, unweighted
- THD + Noise: <0.04%, 0.02% typical at +4dBu, 1kHz
- Noise Reduction: Up to 20dB of dynamic broadband noise reduction
- Type III NR: Activates dbx® Type III® Noise Reduction
- EQ Bypass: Bypasses the Graphic Equalizer section in the signal path
- Low Cut (recessed): Activates the 40Hz 18dB/octave Bessel high-pass filter
- Range (recessed): Selects either +/- 6dB or +/-15dB slider boost/cut range
- Output Level Meter: 4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu
- Gain Reduction Meter: 4-LED bar graph (all Red) at 0, 3, 6, and 10dB
- Type III® NR Active: Yellow LED
- EQ Bypass: Red LED
- Clip: Red LED
- Low Cut Active: Red LED
- +/-6dB range: Yellow LED
- +/-15dB range: Red LED
- Operating Voltage: 100VAC 50/60Hz, 120VAC 60Hz
- 230V: AC 50/60Hz
- Power consumption: 15W
- Main Connection: IEC receptacle
- Dimensions: 3.5″ H X 19″ W X 7.9″ D (8.9cm x 48.3cm x 20.1cm)
- Weight: 8.5 lbs. (3.9 kg)
- Shipping Weight: 9.5 lbs. (4.3 kg)
Product Inputs
Connectors: 1/4″ TRS, female XLR (pin 2 hot), and barrier terminal strip
